Performance advantages of FRP desulfurization tower
The FRP desulfurization tower adopts the principles of inertial collision, condensation, and centrifugal force. Under the power of the induced draft fan, the flue gas falls from a certain height, hits the liquid surface at high speed, and forms water mist. Most of the particles sink into the water. Under the action, the atomized airflow rises rapidly, and the droplets further collide and condense to form a water-ash mixture. The water-ash mixture is separated by steam and water through a cyclone impeller, thereby achieving its desulfurization—dust removal—dehydration effect. The product also has a unique adjustable hood, which can be arbitrarily adjusted on the top of the device to adapt to various air volumes, so that the flow rate of the flue gas is controlled to ensure its normal operation. No matter how large the induced draft fan is, it will not carry water and corrode. Its supporting facilities not only reduce the loss, but also reduce the maintenance and repair costs. Performance advantages of FRP desulfurization tower 1, durable: The dust collector is made of FRP material to ensure that the body of the dust collector will not be corroded under the condition that the PH value of the spray water is 1-2. 2. High desulfurization and dust removal efficiency: The flue gas passes through the porcelain random packing, which increases the contact surface between the flue gas and the aqueous solution, accelerates the full dissolution and neutralization of the flue gas and the spray water, and improves the dust removal, desulfurization and dust removal efficiency of the dust collector. The dust removal efficiency is over 98%, and the desulfurization efficiency is over 85. This is rare in domestic wet dust removal. After using the dust collector, the coal-fired boiler is fully qualified for use in a type of area. 3. Good gas-water separation effect: The flue gas after desulfurization and dust removal passes through a high-speed cyclone separator, and the gas and water mist are separated by a high-speed cyclone. The moisture content of the flue gas is extremely low, and no water vapor can be seen during operation. And the flue caused corrosion. 4. Save water. Water is recycled in the system and does not discharge sewage, which not only eliminates the emitted sulfur dioxide, but also treats the discharged sewage. It can also be widely used in cities that lack water, such as inland.