河北衡水枣强玻璃钢工业园 Address: Zaoqiang FRP Industrial Park, Hengshui , Hebei
13931811637 Mobile: 13931811637
李经理 Contact: Manager Li
email@example.com Email: firstname.lastname@example.org
How should the superbly manufactured glass fiber reinforced plastic sand pipe be stored?
Glass fiber reinforced plastic sand pipe has light weight, high strength, low resistance to liquid transportation, excellent chemical and electrical corrosion resistance, long service life, low general cost, and is an environmentally-friendly material strongly recommended by the country; and the pipe does not require special anti-corrosion treatment The length is longer than that of cast iron and cement pipes, and the joints are relatively reduced, which in turn reduces equipment and maintenance costs.
FRP sand pipe preparation. The glass fiber reinforced plastic sand pipe used in the material inspection has a qualified product inspection statement and product quality guarantee; the inner surface of the glass fiber reinforced plastic sand pipe should be free of cracks, delaminations, pinholes, impurities, lean areas and bubbles; The surface should be free of obvious defects. The end face of the glass fiber reinforced plastic sand pipe should be flush, smooth and free of burrs, and the surface of the socket and socket should be smooth.
The rubber ring of the sewage pipe is made of neoprene, and the rainwater pipe is made of natural rubber. Storage requirements for glass fiber reinforced plastic sand pipe. Storage requirements for glass fiber reinforced plastic sand pipe: The pipe shall be hoisted with double lifting points to prevent the use of ropes to run through the two ends;
When the pipes are directly placed on the ground for storage, the ground should be flat to prevent them from being placed on sharp hard objects. All the stacked pipes need to be added with wooden wedges to prevent them from rolling over. Glass fiber reinforced plastic sand pipe shall be stored in a place far away from heat sources and open flames. Underground pipes should not be exposed to the open air for a long time during the accumulation to prevent ultraviolet radiation. The storage requirements of FRP sand-filled pipes require FRP sand-filled pipes.
The rubber ring should be stored in a cool, clean environment, and should not be exposed to the sun; it should not be touched with oils that will swell and corrode. Prepare on-site construction technical plan and review and approval by the supervisor. Set temporary level points, control piles, etc. according to the site pile materials and relevant regulations, and keep corresponding original records intact. Drainage, precipitation and trench support construction methods should be established for sections with groundwater levels.