河北衡水枣强玻璃钢工业园 Address: Zaoqiang FRP Industrial Park, Hengshui , Hebei
13931811637 Mobile: 13931811637
李经理 Contact: Manager Li
firstname.lastname@example.org Email: email@example.com
Good quality FRP desulfurization tower has been recognized by everyone
The FRP desulfurization tower uses the principles of inertial collision, agglutination, and centrifugal force. Under the power of the induced draft fan, the flue gas falls from a certain height and hits the liquid surface at high speed, forming a water mist. Most of the particles sink into the water. Under the action, the atomizing airflow rises rapidly, and the droplets further collide and agglomerate to form a water-ash mixture. The water-ash mixture passes through the cyclone impeller to separate the soda and water, and then completely reaches its desulfurization-dust removal-dehydration effect.
This product also has a common debuggable hood, which can be arbitrarily adjusted on the upper part of the device to get used to various large and small air volumes, and then the flue gas flow rate has been controlled to ensure its normal operation. No matter how much the induced draft fan will not bring water and corrosion Its supporting equipment not only reduces the loss, but also reduces the cost of protection and repair. FRP Desulfurization Tower Features 1. Durability: The dust collector is made of glass fiber reinforced plastic materials to ensure that the body of the dust collector will not be corroded when the PH value of the spray water is 1-2.
High desulfurization and dust removal power: The flue gas passes through the porcelain random packing, which increases the contact surface between the flue gas and the aqueous solution, accelerates the sufficient dissolution and neutralization of the flue gas and spray water, and improves the dust removal and desulfurization power of the dust collector. The dust removal power is above 98%, and the desulfurization power is above 85. This is rare in domestic wet dust removal. After the use of the dust collector, the coal-fired boiler is fully qualified to be used in a type of area.
Gas and water separation effect is good: the flue gas after desulfurization and dust removal passes through a high-speed cyclone separator, the gas and water mist are separated by a high-speed cyclone, and the moisture content of the flue gas is extremely low. Road formed corrosion. Save water Water is recycled in the system and does not discharge sewage, which not only eliminates the emitted sulfur dioxide, but also treats the discharged sewage. It can also be widely used in cities that lack water, such as inland.