Furnace desulfurization tower
Features of kiln desulfurization tower:
1. Washing type working principle, high efficiency of dust removal and desulfurization, trapping many harmful gases. The BTL flue gas purifier integrates desulfurization and dust removal as a whole. It is a spray method with a unique nozzle design. The glass fiber reinforced plastic spiral nozzle made by American technology sprays dense layers of water mist, dust and harmful gases and water mist under a certain water supply pressure. Full contact, so the effect of dust removal, desulfurization, nitrogen removal and carbon black washing is greatly improved compared with other wet dust collectors. The dust removal rate is ≥98%, the sulfur dioxide removal rate is ≥85%, and the Lingerman blackness of the flue gas is less than 1 level.
2. The design of the dewatering plate is reasonable and unique, and the dewatering effect is good. There is a dewatering device in the cylinder. The design of the dewatering plate is reasonable and unique. When the mist passes through the dehydration device, it will be intercepted and changed by the collision. It will flow down the cylinder wall to prevent secondary water carryover and high dehydration efficiency.
3. Low resistance, water saving, power saving, and low running cost. The flue gas is naturally introduced from the lower part of the cylinder, and the cross section is large and the wind speed is small, so the smoke resistance is small, the main body resistance is less than or equal to 900Pa, and the system resistance is less than or equal to 1200Pa. Due to the small resistance, the power consumption is also small. In addition, the discharged water is deposited and closed for recycling, on the one hand, it saves water resources, and on the other hand prevents sewage from flowing into the sewer, causing secondary pollution, achieving water and power saving effects, and reducing operating costs.
4, small size, light weight, small footprint, convenient installation and transportation. The cylindrical body of this product is a whole structure. It comes with a stand when it leaves the factory. It is very convenient to install and move. It can be installed in various ways such as left and right hanging and overhead laying according to the size of the ground. It has strong adaptability.
5. The operation is relatively simple and convenient, with minimal maintenance, easy operation, management and maintenance, high operation rate, and adaptability to various working environments.
6, strong adaptability to fluctuating SO2 concentration, different desulfurization processes can adapt to different sulfur content of coal; lime, alkali, magnesium oxide and other forms of desulfurizer can achieve good desulfurization effect.
| Title: FRP Desulfurization Tower with Low Operating Cost and Easy Operation and Maintenance |
| Introduction: FRP desulfurization tower is a patented updated product. Using the Doyle principle and updated dehydration technology, after nearly ten years of use and renovation, the latest anti-corrosion, wear-resistant and high-temperature resistant materials have been selected, and environmentally-friendly products with mature technology and reliable performance have been formed. FRP desulfurization tower is widely used in dust removal and desulfurization of urban and rural coal-fired boilers. With high efficiency of dust removal and desulfurization, small footprint. The advantages of low operating cost, easy operation and maintenance, and low water consumption have been well received by customers and environmental protection departments. The main principle of the glass fiber reinforced plastic desulfurization tower: the flue gas hits the water surface in the pool, and the gas and water are fully mixed, and then upward, and dewatered by the dehydrator to achieve the gas-water separation, so that the flue gas is purified, and the purified flue gas exits from the top. discharge. Its technical features are: integrated dust removal and desulfurization, low energy consumption, small footprint, simple operation, significant efficiency, low operating costs, no clogging and no scaling, stable system operation, low piezoresistance loss, and suitable for various sulfur fixing agents And other advantages. In the country ... [ detailed ] |