2019王中王资料精选

Hebei Jurun FRP Products Co., Ltd.
2019王中王资料精选 page about us Honor Products News Center Engineering case Leave message contact us

product description

contact us

河北衡水枣强玻璃钢工业园 Address: Zaoqiang FRP Industrial Park, Hengshui , Hebei

13931811637 Mobile: 13931811637

李经理 Contact: Manager Li

306958637@qq.com Email: 306958637@qq.com

FRP mixing tank





Features of FRP mixing tank
1, pressure resistance, high temperature resistance, corrosion resistance
It consists of a high resin content anti-corrosion lining, an impervious layer, a fiber-reinforced reinforcing layer, and an outer surface layer, which can be used to store and transport various organic and inorganic media. The working temperature is between -50 and 250 ° C, and the pressure resistance is average. Below 6.4MPa
2.Insulation, insulation and long life
FRP mixing tank is insulated, has low permeability and low thermal conductivity, effectively maintains constant temperature, and has a long service life of up to 50 years.
3. Non-toxic, smooth surface, easy to clean
The glass fiber reinforced plastic mixing tank has fast discharging, no residue in the discharge, easy to clean, smooth surface (n = 0.0084), beautiful appearance and non-toxic
4, according to customer needs, can add tank heating and cooling equipment maintenance
1. This equipment is atmospheric pressure equipment. If the pipeline of the heat exchanger is unblocked, it is also regarded as atmospheric pressure.
2. If a condenser is configured, it can be judged whether it should be cleaned according to the effect of heat.
3. If the equipment is not suitable for a long time, it should be thoroughly cleaned, filled with lubricating oil and cut off the power.
FRP mixing tank is a collection of mixing shaft, internal components, shaft seals, liquid seals, packing seals, machine seals, transmissions, motors, and agitators. It is mainly composed of two parts: the mixing tank body and the mixing system. The FRP mixing tank is composed of a high resin content corrosion-resistant lining impervious layer, a fiber-reinforced reinforcing layer and an outer surface layer, which can be used for storage and transportation of various organic and inorganic media.
The unique advantages of FRP mixing tank The tank body is made of high-strength FRP as a whole, which not only solves the requirements for the high strength of the tank during mixing, but also solves the harsh anticorrosion requirements of the mixing tank in the chemical industry. Corrosion resistance. The materials will not age if used for many years. The accessories such as mixing shafts and mixing paddles are made of carbon steel-lined FRP anti-corrosion or stainless steel according to different process requirements.









related 2019王中王资料精选
Title: Phenomenon and Prevention of Floating Pipe of FRP Sand Pipe
Introduction: Glass fiber reinforced plastic sand pipelines are often used in liquid and gas transportation, and the use of pipelines of this material will also encounter floating light. What precautions are there? The first type of floating pipe phenomenon is the rainwater floating pipe. As the name implies, the rainwater entry causes the floating pipe phenomenon. The prevention method is relatively simple. The construction unit pays close attention to the weather forecast as much as possible to avoid rainy construction. After the installation of the pipeline is completed, the backfill is timely. Do not block the mouth of the pipe, otherwise water will easily accumulate. If the trench backfilling does not reach the design elevation, the construction unit shall pump water after raining to control the water accumulation in the trench reasonably. Another situation is the groundwater float pipe. Coarse sand or stone powder slag is usually used for backfilling of FRP sand-filled pipes. This kind of filler will cause friction to the pipe. If the top of the pipe is not covered with enough soil, a floating pipe phenomenon will occur. In view of such problems, the preventive method is to follow the amount of groundwater seepage when the design elevation cannot be backfilled at one time.
24-hour consultation hotline:
13931811637
2019王中王资料精选 about us Honor Products News Center Engineering case Leave message contact us Sitemap xml map
General Manager: Manager Li Mobile: 13933811637 Address: Zaoqiang FRP Industrial Park, Hengshui, Hebei Landline: 0318-8988777 Fax: 0318-8988778 Email: 306958637@qq.com
© 2018 Hebei Jurun FRP Products Co., Ltd. All rights reserved
online service