河北衡水枣强玻璃钢工业园 Address: Zaoqiang FRP Industrial Park, Hengshui , Hebei
13931811637 Mobile: 13931811637
李经理 Contact: Manager Li
firstname.lastname@example.org Email: email@example.com
FRP grille case
When the FRP grille is purchased and used, many people think that the laying should be a relatively simple matter. In fact, it is better to lay it professionally if it is not laid. For various problems, Anqiu Jiangshan FRP Factory has been producing FRP gratings for many years, and has also instructed customers to install for many years. Let Xiaobian come to learn with you! Because the types, thicknesses, etc. of glass fiber reinforced plastic grids are different, so the laying methods are not the same. They are divided into two types: self-adhesive and non-adhesive. Adhesives need to be fixed with steel nails or other means. Professionals must be installed or instructed when laying the FRP grid. After unpacking the FRP grille, the front and back must be clearly distinguished. Usually, there are marks or colors on both sides. When laying, be sure to clean the contact area with the grid to prevent dust from affecting the adhesive effect. Fix the steel fiberglass grille with steel nails before installing. Clean the installation position, and then fix the iron sheet with steel nails to avoid loosening and breaking during the rolling process. At the place of transfer, pay attention to placing the previous section on top of the latter section to ensure that the subsequent laying can be firm and tidy. During the process, make sure that the glass fiber is in a straight and vertical state when it is stretched. After the fixing is completed, the rubber roller roller must be moderately rolled and stabilized to make the glass fiber reinforced plastic grid adhere to the original road surface firmly. The laying and installation directly affects the service life of the FRP grille, so be sure to ask professional installers to assist you when laying.